Job Description (JD)
| Nama Program | Proses Gabungan Kimpalan Arka Gas Tungsten & Kepingan Logam [MC-028-3:2014] |
|---|---|
| Kod CU | MC-028-3:2014-C02 |
| Competency | Core |
| Tajuk CU | GTAW & SMAW COMBINED WELDING PROCESS (FILLET WELD 1F, 2F, 3F, 4F, BUTT WELD 1G AND 2G) |
| Penerangan CU | Gas Tungsten Arc Welding (GTAW) and Shielded Metal Arc Welding (SMAW) Combined Welding Process covers the application of Fillet Weld 1F, 2F, 3F, 4F, Butt Weld 1G and 2G on ferrous and non-ferrous metals according to established Welding Procedure Specification (WPS) and work instruction. The combined welding of GTAW and SMAW produces better outcome in terms of quality of the weldment, cost effectiveness and time saving as compared to the other single welding processes. In performingGTAW & SMAW Combined Welding Process (Fillet Weld 1F, 2F, 3F, 4F, Butt Weld 1G And 2G) welder is requiredto identify welding requirement, verify base metal specification, prepare welding hand tools equipment & consumable material prior to the welding process itself. Then, the welder performs GTAW process followed by SMAW process to produce structural work or product as per WPS. The outcome of this competency is to ensure that welding base metals are joined by means of combined welding processes effectively and in accordance with Standard Operating Procedures (SOP) and Welding Procedure Specification (WPS). |
| Tempoh Latihan | 440 |
| Objektif Pembelajaran | The person who is competent in this CU shall be able to GTAW & SMAW combined welding process including fillet weld 1F, 2F, 3F, 4F and butt weld 1G and 2G on carbon steel or stainless steel material. Upon completion of this competency unit, trainees will be able to:- 1. Identify welding requirement 2. Verify base metal specification 3. Prepare welding hand tools, equipment & consumable material 4. Perform GTAW process 5. Perform SMAW process 6. Perform destructive test 7. Carry out work area housekeeping |
| Pra-Syarat | 0 |